A versatile and easy-to-use solution for ensuring clean, efficient demoulding across a wide range of composite manufacturing processes. Available in two grades—SPL (Single-Release) and Brown (Multi-Release)—this wax is a blend of natural and synthetic waxes formulated for excellent surface finish and reliable release.
SPL Grade: Suitable for single-release cycles. Ideal for basic or one-time moulding tasks.
Brown Grade: Designed for multiple release operations, making it cost-effective and ideal for high-throughput environments.
Effective for all mould types – new, seasoned, or reconditioned.
Time-saving – especially with multi-release applications.
Smooth finish – ensures a high-gloss surface when properly buffed.
Compatible with Polyvinyl Alcohol (PVA) for enhanced protection in intricate or expensive moulds.
For porous moulds (e.g., plaster or wood), seal first using a lacquer or primer-sealer.
Ensure moulds are clean, dry, and free from contaminants before application.
New / Reconditioned Moulds:
Apply a thin, even coat using a clean dry cloth.
Buff after 10–12 minutes using a soft cotton cloth or Turkish toweling.
For full coverage, apply 2–3 coats, using alternating circular and directional motions (up-down, left-right).
Allow at least 1 hour after final coat before moulding.
Seasoned Moulds:
Apply just one coat and buff. Reapply as needed.
Most parts can be removed by lifting around the edges after curing.
For complex or curved parts, use air jets or gently tap with a rubber mallet to aid separation.
Supplied in 1 kg and 25 kg containers.